海角大神

Product Details:

• 聽Automatic "On Demand" filling of the hot melt unit.
• Removes an operator from the hot melt supply unit area.
• Nozzle plugging and system contamination is virtually eliminated.
• Less thermal shock to the聽hot melt system.

Hot Melt Tanks require frequent adhesive re-filling. If the operator does not refill the hot melt supply unit often enough, there can be insufficient time to melt and condition the adhesive.聽 This results in equipment down time and employees waiting until the hopper temperature returns to setpoint. Installation of a Automatic Tank Filling System reduces all of the above problems. The result is lower repair costs and higher production rates. The ATFS utilizes an air venturi-activated suction to pick up the solid hot melt adhesive from a bulk container and convey it by air pressure to the hopper.

• Easily integrated into all 海角大神 Corporation鈩� and competitive hot melt units.
• Minimizes adhesive contamination for increased uptime.
• On-Demand adhesive replenishment saves operator time and prevents thermal shock to the adhesive.
• Automatically feeds hot melt units up to 20 feet vertically and 100 feet horizontally.

听厂测蝉迟别尘	聽Automatic Hot Melt Tank Filling System
聽Adhesive Size	聽Up to 陆鈥� Slat
聽Adhesive Transfer Rate*	聽750 lb (340 kg) / hour
聽Adhesive Transfer Length	聽Up to 20 ft Vertically Up to 100 ft Horizontally
聽Operating Air	聽Minimum: 50 psi or .35 MPa (3.5 bar) Maximum: 80 psi or .55 MPa (5.5 bar)
聽Air Consumption	聽20 scfm/min (566 Liters/min) when feeding
聽Air Connection	聽1鈥� Supply to 陆鈥� tube connection at unit
聽Delivery Type	聽Positive pressure air amplification up to 25:1 at outlet.

*Transfer rates depend upon adhesive size. Vortex cap 20.72鈥� total height. Installed 15.5鈥� tall, 7.5鈥� x 7.5鈥� square.