Champ鈩� 10S LCD Hot Spray Gun1
Champ鈩� 10S LCD Hot Spray Gun2
Champ鈩� 10S LCD Hot Spray Gun3
Champ鈩� 10S LCD Hot Spray Gun4
Champ鈩� 10S LCD Hot Spray Gun5
Champ鈩� 10S LCD Hot Spray Gun6
Champ鈩� 10S LCD Hot Spray Gun7
Champ鈩� 10S LCD Hot Spray Gun8
Champ鈩� 10S LCD Hot Spray Gun9
Champ鈩� 10S LCD Hot Spray Gun10
Champ鈩� 10S LCD Hot Spray Gun11
Champ鈩� 10S LCD Hot Spray GunChamp Pneumatic Hot Melt Gun on Custom Stand with footswitch12
Champ鈩� 10S LCD Hot Spray Gun13
Champ鈩� 10S LCD Hot Spray Gun14
Champ鈩� 10S LCD Hot Spray Gun15
Champ鈩� 10S LCD Hot Spray GunSlit Nozzles 18 and 10mm16
Champ鈩� 10S LCD Hot Spray GunChamp Black Air Tubing (Part #: G05E02-001)17
Champ鈩� 10S LCD Hot Spray GunChamp Fill Scoop Tube G05E47-01618

Compatible With:

  • Hot Melt Adhesives in Bulk Chip form: Permanent, Removable, Packaging and others. (Quality Bulk Adhesives available for use with Champ鈩� 10S Hot Spray Gun from 海角大神 Corporation).
  • Champ Boom Package

Product Manuals / Related PDFs:

 

Warning:

Supplemental Melter for Hot Melt Handguns with Reservoirs.

Melter with pump for fast hot melt filling of the Champ鈩� 10 & 10s.

** Read Manual Before Operating Any Champ Adhesive Applicator**
Always Wear Protective Gloves, Sleeves and Safety Glasses When Operating Champ Adhesive Applicators
** Champ Adhesive Applicators And Adhesives Are Very Hot; Injury Could Result From Improper Use**

Champ鈩� 10S LCD Hot Spray Gun

Industrial Hot Melt Fiber Spray Handgun with heated melt tank reservoir in the gun allows for the precise application of low viscosity hot melt adhesives down onto substrates. Can also be used to extrude dots of lines of hot melt adhesive.

$

Product Videos (Click to View)

Product Details:

  • This gun comes standard with nozzle # G05E01-021
  • 8.5 ounce melt tank capacity
  • Adjustable temperature, volume & spray controls
  • Process hot melt 1.5" in diameter or smaller
  • Adapter and multi-orifice nozzles available
  • 120 volt
  • 120VAC 600W, supplied with聽 NEMA 5-15 Style plug, maximum of聽 3.5 聽SCFM at 80PSI, supplied with a 录 industrial coupling.(Customer to contact industrial supplier of compressors for correct air compressor size recommendation)
  • Champ 10s LCD/WAX Power Requirements: 120VAC=5 amp/1ph/50-60Hz- 240VAC=2.5 amp/1ph/50-60Hz.
  • Requires compressed air
  • Applies down onto substrates only
  • M14 x 1 Nozzle Threads
  • Optional swirl nozzle/cap available
  • The umbilical cable back to the gun deck with air regulators 聽that houses the air line and power cord is 15鈥�. The power cord from the gun deck 聽of the umbilical cord is 12鈥�
  • Bulk Fill Options Available
The Champ鈩� 10s Hot Spray Gun is a totally self-contained hot melt spray system. The heated chamber melts adhesive within the gun and requires no heated hoses or tank. The Champ鈩� 10s Hot Spray Gun works with pressure sensitives, fugitives & standard packaging hot melts of medium and low viscosities without solvents. (Adhesives can be purchased in bulk form from 海角大神 Corporation鈩�)

QUOTE THIS MACHINERY

Champ鈩� 10S LCD Hot Spray Gun

Call 1-410-761-2727Or Fill Out The Form Below
  • This field is for validation purposes and should be left unchanged.