Champā¢ 600 Bulk Hot Melt Handgun1
Magnetic Base included with gun2
Champā¢ 600 with wire stand3
4
Filling Champā¢ 6005
Champ 600 with Hosel Nozzle6
Champ 600 cutout7
8oz Melt tank8
Tank Opening is 1.8"9
Single Orifice Nozzles10
Multi Orifice Nozzles11
Extended Nozzles12
Custom 3 hole nozzle13
Three Hole Case Sealing Nozzle 14
It is best to always apply hot melt downwards15
16
Filter End Cap Gluing17
18
120VAC/ 500 Watt/ 50-60 Hz, supplied with NEMA 5-15 Style plug. 19
20
Champ 600 guns assembled and tested21
G05E01-030 Extended Nozzle Insert +
G05E01-029 Basic Nozzle for insert
22
Multi Orifice Nozzles available23
24
Coming soon... Champ 600 LCD25
Champ 600 with boom and balancer26
Champ 5 with Tool Balancer and Mandrill27
28
29
3 and 4 " Hosel Nozzles for Champ 60030
Champ 600 LCD with Hosel Nozzle31
32
33
Champ Fill Scoop Tube G05E47-01634
In Stock for Fast Shipment35
In Stock for Fast Shipment36
Champ 600 w/ boom for packaging 37Compatible With:
Hot Melt Adhesives in Bulk Chip form: Permanent, Removable, Packaging and others. (Quality Bulk Adhesives available for use with Champā¢ 600 from ŗ£½Ē“óÉń Corporation)Product Manuals / Related PDFs:
Champā¢ 600 Nozzle List Manual Available - Please contact us.Warning:
- Read and understand Champ 600 manual before operating
- Ā Only apply hot melt down to substrate
- Operate when adhesive is molten in chamber only
- Ā Never tilt the gun back or lay down
- Ā Always ensure back lid is closed before using
- Do not overfill reservoir
- Add small quantities of hot melt to the reservoir regularly
** Read Manual Before Operating Any Champ Adhesive Applicator**
Always Wear Protective Gloves, Sleeves and Safety Glasses When Operating Champ Adhesive Applicators
** Champ Adhesive Applicators And Adhesives Are Very Hot; Injury Could Result From Improper Use**
Champā¢ 600 Bulk Hot Melt Glue Gun
$840.00+shipping
The Champā¢ 600 Industrial Hot Melt Handgun, with 8 ounce melt tank, has a high output piston pump, The "No Drip" check valve nozzle tip virtually eliminates stringing. This tool also comes complete with adjustable temperature controls and a locking tank lid, for use with low cost bulk hot melt adhesives.
This tool produces a bead or line pattern.
Click here for Product Details
In stock
Product Videos (Click to View)
Product Details:
Also available in 240V please call for quote 888-202-2468
- Offers precise dots or beads
- High flow piston pump trigger mechanism
- Check Valve nozzle tip to minimize "stringing" and dripping
- Processes bulk hot melt adhesive in chip or pillow form
- "All Electric", no air required
- 8 oz. adhesive melt reservoir in gun
- 2 lb. per hour melt rate depending upon adhesive
- Adjustable thermostatic temperature control: 122Ā°F to 392Ā°F (50Ā°C to 200Ā°C)
- Multiple nozzle configurations available
- Gun Weight: 3.25 pounds (without adhesive)
- Power Requirements:
- 120VAC=4.16 amp/1ph/50-60Hz/500 Watt-supplied with NEMA 5-15 Style Plug
- 240VAC=2.08 amp/1ph/50-60Hz
- Wire stand and magnetic stand gun base to bond to metal table
- Cord Length : 7'9"
- 120 or 240 VAC
- One nozzle included with each gun purchase
- Used with standard hot melt (non-reactive)
- Operate with hot melt adhesive from 500 to 20,000 centipoise
QUOTE THIS MACHINERY
Champā¢ 600 Bulk Hot Melt Gun with “No Drip” check valve
Call 1-410-761-2727Or Fill Out The Form Below